Mochini oa Welding oa Ultrasonic

 

Potso ea morero	HAIFEI bokhoni
Ke lintho life tse ka hlahlojoang?	Koporo e se nang letho, koporo e entsoeng ka sekoti, aluminium le lisebelisoa tse sa tšoaneng tsa conductive
Ke mehaho efe e kopanetsoeng e tšehetsoeng?	Khoele-ho-terata,{2}}ho-boetelong, tšepe-ho-manonyeletso a tšepe le terata kapa thapo e koalang
Ke lintlha life tse khethollang khetho ea mochine?	Material, total conductor cross-section, joint geometry, weld area, matla a hlokahalang le nako ea potoloho
Na ho hlokahala solder kapa flux?	Che. Ultrasonic tšepe welding ka tloaelo e kopanya lisebelisoa ntle le solder, flux kapa filler metal
Na boleng ba weld bo ka behoa leihlo?	Matla a welding, nako, amplitude, khatello, phalliso le lintlha tse ling tsa ts'ebetso li ka hlahlojoa ho latela tlhophiso ea mochini.
Na mochini o le mong o ka sebetsana le lihlahisoa tse fapaneng?	Malapa a lihlahisoa tse khethiloeng a ka sebetsoa ka lisebelisoa tse fetohang le litlolo tse bolokiloeng tsa welding
Na lisebelisoa li ka iketsetsa?	Ho fepa ka boiketsetso, ho beha maemo, ho cheselletsa, ho hlahloba, ho laolla le ho rekota data ho ka kopanngoa
Na mohlala oa welding oa fumaneha?	Ee. Teko ea sampole e khothaletsoa pele mochini le tokiso ea lisebelisoa e phetheloa

 

 

Ultrasonic metal welding ke mokhoa o tiileng- oa ho kopanya. Lisebelisoa li ts'oaroa lipakeng tsa sonotrode le anvil ha ho sisinyeha ho phahameng- khafetsa ho sebelisoa tlas'a khatello e laolehileng ea clamping.

Ho thothomela ho kopantseng le khatello ho hlahisa motsamao oa lifahleho tsa lehae le deformation ea polasetiki. Sena se thusa ho senya lifilimi tse holim'a metsi le ho tlisa libaka tse hloekileng tsa tšepe hore li kopane haufi-ufi, ho lumella bond ea metallurgic ho theha ntle le ho qhibiliha ka ho feletseng lisebelisoa tsa motheo.

Potoloho e felletseng ea welding hangata e kenyelletsa:

• Lithapo tse hlobotsoeng kapa likarolo tsa tšepe li behiloe ka har'a sesebelisoa.
• Mochini o sebelisa khatello ea "clamping" esale pele.
• Jenereithara ea ultrasonic e fana ka matla a motlakase ho converter.
• Mofetoleli le booster li fetisetsa ho sisinyeha ha mochine ho sonotrode.
• Sonotrode e sebetsa ho sisinyeha ho sebopeho sa welding.
• Lisebelisoa li kopanya le ho theha lenonyeletso.
• Sistimi e phethela sethala sa ho ts'oara ebe e lokolla workpiece.
• Lintlha tsa welding li hlahlojoa khahlano le meeli ea ts'ebetso e hlophisitsoeng.

Motsoako oa ho qetela o itšetlehile ka ho sebelisana pakeng tsa amplitude, khatello, matla a ho tjheseletsa, nako, boemo ba lisebelisoa le ho lumellana ha workpiece. Mekhahlelo ena e tlameha ho ntlafatsoa ka liteko ho fapana le ho khethoa ho tloha boholo ba terata feela.

 

 

Mofuta oa mochini	Sebopeho se kopane	Mosebetsi o tloaelehileng	Motheo oa khetho ea mantlha
Mochini o kopanyang oa terata oa Ultrasonic	Khoele-ho{1}}terata	Mengata ea terata ea koporo kapa ea aluminium	Kakaretso ea likarolo tse fapaneng tsa -, tlhophiso ea liphutheloana le litekanyo tsa splice
Mochini oa welding oa Ultrasonic terminal	Khoele-ho-boemelong	Khokahano ea cable, lug, terminal kapa motlakase	Sebaka sa lithapo, lisebelisoa tsa terminal, plating le sebaka sa weld
Ultrasonic metal spot welder	Tšepe-ho{1}}tšepe	Foil, plate, terminal kapa conductive component	Sekhahla sa lintho tse bonahalang, sebaka se kopanetsoeng le matla a hlokahalang
Mochini oa ho tiisa oa terata kapa oa tube end	Qetella ho tiisa le ho theha	Sephutheloana sa terata ea koporo, sekontiri se lohiloeng kapa tube	Diameter, botenya ba lebota le profil e felileng
Automatic ultrasonic welding system	Mokhoa o kopantsoeng oa tlhahiso	-molumo o phahameng oa terata le likopano tsa theminale	Nako ea potoloho, ho fepa, ho hlahloba, ho latelloa le phetoho ea mohlala

 

Matla a khethehileng, maqhubu le li-welding li lokela ho netefatsoa leqepheng le lumellanang la sehlahisoa kapa ka tlhahlobo ea sampole.

 

 

 

 

 

Ho khetha mochini oa welding oa ultrasonic o nepahetseng ho hloka ho hlakisa litlhoko tsa welding, bophahamo ba tlhahiso, litlhaloso tsa thepa, le boemo ba othomathiki ho tsamaisana le mofuta o nepahetseng oa mochini.

Hlalosa hore na mokhoa oa hau ke oa-oa ho etsa terata e le 'ngoe kapa -ho hokahana ka lithapo tse ngata, e leng se laolang ka kotloloho mofuta oa mochini.

Mechini ea welding ea terminal:

• Khokahano ea terata e le 'ngoe ho ea ho litheminale tsa tšepe
• Litlhoko tse phahameng tsa weld le litlhoko tse nepahetseng
• Liindasteri tse tloaelehileng: liteishene tsa libeteri tsa likoloi, lihokelo tsa lisebelisoa tsa lapeng, liteishene tsa motlakase

Mechini e kopanyang terata:

• Ho kopanya lithapo tse ngata ho etsa marapo
• E hloka{0}}mehano e tlase, e matla{1}a hodimo
• Liindasteri tse tloaelehileng: lithapo tsa likoloi, li-battery pack busbar, lithapo tsa taolo ea indasteri

 

Netefatsa gauge ea terata, thepa ea conductor, le mofuta oa insulation ho netefatsa boleng ba weld.

• Tekanyo ea terata le mofuta oa conductor: sekala se senyenyane (0.1–1.0 mm²) se tšoanela ho tjheseletsa theminale; sekala se seholo,-mehala e mengata, kapa lithapo tsa koporo/aluminium tse kopantseng
• Mofuta oa insulation: PVC, TPE, silicone, joalo-joalo, e ama matla a tjheseletsa le khatello
• Litlhoko tsa hajoale: -lithapo tsa hajoale li hloka litšepe tse tlase- tse sa khoneng ho sebetsa nako e telele{2}}

 

Bala se hlokahalang ho khetha boemo bo nepahetseng ba othomathike, ho qoba matsete a feteletseng kapa bokhoni bo sa lekaneng.

• Mechini ea{0}seteishene e le 'ngoe ea tjheseletsa: e loketse tlhahiso e nyane ho isa ho e mahareng
• Mechini e mengata-ea liteishene/e itirisang: e loketse tlhahiso{1}e phahameng,{2}ka lebelo le phahameng{2}
• Etsa qeto ea lebelo la tlhahiso (welds ka motsotso / hora) ho bapisa matla a mochine

 

Khetha boemo ba othomathike ho latela ho rarahana ha tlhahiso le litlhoko tsa data.

• Mochini oa mantlha: ho kenya letsoho ka letsoho, ho loketse lihlopha tse nyane kapa R&D
• Semi-ea iketsang: ho kenya letsoho ka letsoho, ho tjheseletsa ka tsela e iketsang, bakeng sa tlhahiso e mahareng
• E itirile ka botlalo/roboto-e kopantsoeng:{1}}liteishene tse ngata tsa tlhahiso e tsoelang pele, ho nepahala ho hodimo
• Ho latela lintlha: mechini ea dijithale kapa ea PLC bakeng sa tlhahlobo ea tlhahiso le ho lateloa ha boleng, boikhethelo ba ho kopanya MES

 

Khetha lebitso le tšepahalang bakeng sa ts'ebetso ea nako e telele- le katoloso ea mohala oa nako e tlang.

• Ho tsitsisa ha mochini, li-parameter tsa welding tse feto-fetohang, le likarolo tse ka nkeloang sebaka
• Moralo oa modular bakeng sa ho eketsa liteishene kapa ho ntlafatsa liroboto
• Ho fumaneha ha{0}}tšebeletso ka mor'a thekiso le tšehetso ea tekheniki

 

Tlhaloso	Yuniti	HF{{0}WX-20DZ	HF{{0}WX-20WD	HF{{0}WX-20XC	HF{{0}WX-20XB	HF{{0}WX-20DA	HF{{0}WX-FW	HF{{0}WX-20SD
Boholo ba Matla	kW	16	8	9 / 6	3	6 / 3	3	3
Maqhubu a Tshebetso	kHz	20	20	20	20	20	20	20
Kenyeletso ya Matla	V/Hz	380/50	380/50	380/50	220/50	380/50 / 220/50	220/50	200–380/50
Kenyelletso ea Phepelo ea Moea	MPa	0.5	0.5	0.5	0.5	0.5	0.5	0.5
Thepa Boima	kg	1200	680	80 / 50	30	150 / 150	20	80
Litekanyo – Bolelele	mm	2060	1300	120 / 80	100	66	/	/
Litekanyo - Bophara	mm	1010	1000	90 / 85	65	70	55	/
Litekanyo - Bophahamo	mm	2300	2000	160 / 150	25	85	25	/
Sebaka sa Welding	mm²	50–95	35–70	5–100 / 25–50	0.5–25	16–35 / 2–16	2–10	0.02–0.2 limilimithara

 

 

 

1	Matla a Kopanetsoeng a Fokolang kapa a sa Feleng	Lisosa tse ka bang teng li kenyelletsa fensetere e sa lokang ea paramethara, lisebelisoa tse senyehileng, li-conductors tse nang le tšoaetso, ho beoa ha terata ho sa tsitsang kapa ho feto-fetoha ha kakaretso ea karolo- ea khondara.
2	Likhoele Tse hlephileng Ho pota-potile Splice	Likhoele tse hlephileng li ka bakoa ke ho beoa ha terata ka tsela e fosahetseng, litataiso tse ka mahlakoreng tse sa lokelang, sets'oants'o se sa lekaneng sa lithulusi kapa boholo bo fosahetseng ba phaposi ea splice.
3	Phetoho e Feteletseng ea Mohala	Khatello e feteletseng, matla kapa amplitude e ka hlahisa splice e hatelitsoeng ho feta tekano kapa ea senya likhoele tsa motho ka mong. Sebaka sa ho ikopanya le lisebelisoa le meeli ea weld e lokela ho hlahlojoa hammoho.
4	Ho Petsoha kapa ho Koba	The terminal e ka 'na ea haelloa ke tšehetso e lekaneng, kapa boemo ba welding bo ka ba haufi haholo le karolo e kobehileng, ea moeli kapa e tšesaane. Geometry ea terminal le ts'ehetso ea lisebelisoa li lokela ho hlahlojoa pele li eketsa kapa ho fokotsa matla a ho chesoa.
5	Tšenyo ea Wire Insulation	Tšenyo ea insulation e ka 'na ea etsahala ha bolelele ba ho hlobola bo sa lekana, sekontiri se haufi haholo le sebaka sa welding kapa sesebelisoa ha se tšehetse mohala ka nepo.
6	Liphetho tse sa tsitsang ka mor'a hore nako e telele ea tlhahiso e matha	Ho roala ha lisebelisoa, ho aha thepa, ho fetoha ha thempereichara le libaka tse sa tsitsang tsa mosebetsi li ka ama botsitso ba nako e telele-. Tlhoekiso ea kamehla, tlhahlobo le tlhokomelo e thibelang ho hlokahala.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mochini o nepahetseng oa welding oa ultrasonic o ke ke oa khethoa ho tloha boholo ba mokhanni feela. Sebopeho se kopaneng, thepa, moralo oa terminal, sebaka sa weld, matla a mochini, ts'ebetso ea motlakase le potoloho ea tlhahiso li tlameha ho hlahlojoa hammoho.

Romella HAIFEI litšoantšo tsa hau, likhokahano tsa terata, lisampole tsa terminal le litlhoko tsa kamohelo. Baenjineri ba rona ba tla lekola hore na kopo ea hau e hloka mochini o kopanyang terata, welder ea terminal, welder ea tšepe, mochini o tiisang kapa sistimi e ikhethileng ea ultrasonic welding.

 

 

Kopa Tharollo ea ho Welding ea Ultrasonic

 

 

Wuxi Haifei Intelligent Equipment Co., Limited e tsebahala{1}e le e 'ngoe ea baetsi le barekisi ba ka sehloohong ba mochini oa ho cheselletsa litšepe naheng ea China. Ka kopo netefatsa hore u tla reka mochini oa welding oa boleng bo holimo o entsoeng Chaena mona ho tsoa fekthering ea rona. Bakeng sa therisano ea litheko, ikopanye le rona.